EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a really efficient solar controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification technological know-how, it assures optimized Electricity conversion and system stability for an array of photovoltaic (PV) programs.

Essential Options of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for outstanding solar Strength harvesting. Critical capabilities involve:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with authentic-time facts checking.
Many Load Regulate Modes which include guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Action Manual to Organising the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Be certain all parts are bundled: Tracer AN device, temperature sensor, communication cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and ensure the process is driven off prior to connecting components.

Move one: Connect the battery terminals into the demand controller (favourable to constructive, unfavorable to negative).
Move 2: Connect the photo voltaic panel array on the PV input terminals.
Move 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power to the controller by connecting the battery 1st.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using visit here the MT50 distant meter.
Info is usually logged through the RS485 communication port working with application like Photo voltaic Station Computer.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation one: No Electricity Output

Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense

Confirm the photo voltaic array’s voltage rating.
Change procedure parameters if necessary.
Challenge 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT settings while in the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation makes sure:

Larger Performance: Decreased Electricity losses throughout conversion.
Improved Trustworthiness: Steady effectiveness under variable masses.
For a longer period Battery Existence: Dependable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guideline, consumers can assure maximum efficiency and technique longevity.