EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Solar Cost Controller is actually a very economical photo voltaic controller suitable for off-grid photo voltaic techniques. Based on multiphase synchronous rectification engineering, it makes sure optimized Power conversion and system balance for a wide range of photovoltaic (PV) applications.

Essential Attributes of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Demand Controller engineering for excellent photo voltaic Electrical power harvesting. Key attributes include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
State-of-the-art MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with serious-time details checking.
Many Load Regulate Modes which include guide and timer.
Thorough Electronic Protections in opposition to overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are provided: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Select a well-ventilated, dry locale near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and ensure the procedure is driven off just before connecting components.

Move one: Link the battery terminals to the demand controller (beneficial to optimistic, damaging to destructive).
Action 2: Connect the photo voltaic panel array for the PV enter terminals.
Phase 3: Link the load terminals if utilizing a direct load relationship.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power within the controller by connecting the battery visit here initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Data Logging
The Tracer AN Series supports genuine-time checking using the MT50 remote meter.
Facts could be logged by means of the RS485 interaction port employing software program for example Solar Station Computer system.
Remote checking is possible with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electrical power Output

Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Around-Voltage Safety

Verify the solar array’s voltage score.
Adjust process parameters if important.
Concern three: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification engineering makes sure:

Greater Performance: Decreased Strength losses during conversion.
Improved Trustworthiness: Stable functionality under variable masses.
Extended Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is really an Outstanding choice for optimizing solar energy generation and increasing battery existence. By next the above setup information, users can guarantee most efficiency and technique longevity.