EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Charge Controller is a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Depending on multiphase synchronous rectification know-how, it makes sure optimized energy conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller engineering for remarkable photo voltaic energy harvesting. Critical capabilities contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery life.
LCD Show with serious-time facts checking.
Several Load Command Modes together with handbook and timer.
Extensive Digital Protections versus overcharging, over-discharging, quick circuits, and reverse polarity.
Phase-by-Stage Manual to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Make certain all elements are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery specs.
2. Mounting the Demand Controller
Choose a properly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep good clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Always adhere to good basic safety protocols visit here and ensure the program is powered off before connecting factors.
Phase 1: Hook up the battery terminals to your cost controller (good to favourable, detrimental to damaging).
Step two: Link the solar panel array to your PV input terminals.
Phase three: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power within the controller by connecting the battery initial.
Utilize the Liquid crystal display Exhibit to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time monitoring utilizing the MT50 remote meter.
Details might be logged by way of the RS485 interaction port employing software program which include Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electrical power Output
Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Defense
Verify the solar array’s voltage rating.
Change system parameters if needed.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options from the menu.
Benefits of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Existence: Constant and exact charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is really an exceptional choice for optimizing solar energy technology and extending battery daily life. By next the above mentioned set up guidebook, people can ensure optimum efficiency and procedure longevity.